Silicone / Cartridge Type 3D Printer Heater 24V 40w Heating Element For 3D Printer

Product Categories

Tutco Electric Duct Heater [20]
Silicone Rubber Heater [62]
Electric Coil Heater [31]
Clothes Dryer Heater Element [20]
Kapton Polyimide Heaters [26]
Finned Tubular Heater [40]
Compressor Crankcase Heater [28]
Aluminum Foil Heater [19]
3D Printer Heater [22]
Mica Heating Element [34]
High Temperature Cartridge Heater [27]
Printed Circuit Board Heater [12]
Food Warmer Heating Element [20]
Compressed Air Heater [20]
Cast Aluminum Heaters [20]
PTC Heater Assembly [16]

Changshu Flex-Tek Thermal Fluid Systems Manufacturer Co., Ltd.

Contact Now

Silicone / Cartridge Type 3D Printer Heater 24V 40w Heating Element For 3D Printer

Name: Silicone Cartridge Type 3D Printer Heater 24V 40w Heating Element For 3D Printer
Brand: Tutco
Price: 1 USD

China Silicone / Cartridge Type 3D Printer Heater 24V 40w Heating Element For 3D Printer factory

Brand Name : Tutco

Model Number : 110V -240V

Certification : UL

Place of Origin : China

MOQ : 1

Packaging Details : EXporting packing

Type : Silicone & Cartridge

Material : SS304, Incoloy & Silicone

Brand : TUTCO

Voltage : 24V, 40W

Life : ≥4years

Warranty : 18 months

Price : negotiation

Contact Now

High Quality 24V 40W cartridge heater for 3D printer TUTCO

Description

24V 40W cartridge heater for 3d printer use metal tube as a sheath (including stainless steel, copper tube), which utilize resistance wiring close to the heater sheath for heating transfer ,isolated by a thin layer of compacted MgO insulation.

For this 24V 40W cartridge heater for 3d printer can also specify lead length and choose from a variety of lead options. Leads can be insulated with fiberglass or PTFE or protected by stainless steel braid or hose.

24V 40W cartridge heater for 3d printer also have an option many others lack: the ability to have an internal J or K-type thermocouple located near the tip of the heater.

Features & Technical Data

Sheath material	SUS304.321.316,Incoloy800.840,Titanium
Resistance wire	NiCr2080
Maximum temperature	800°C
Maximum Watt density	25W/cm²
Maximum voltage	480VAC
Wattage tolerances	+5 percent, -10 percent
Resistance tolerance	-10 percent, +5 percent
Lead types	Silicone insulated lead ( 250°C )
	pure nickel glass fiber lead ( 800°C )
	PTFE lead ( 200°C )
Internal thermocouple	Type J or K available
Length tolerance	±1 mm
Diameter tolerance	-0.02mm
Camber tolerance	1.7mm per meter (0.020” per foot)
Insulation resistance (cold)	≥ 500 MΩ
Maximum leakage current (cold)	≤ 0.5 mA
Dielectric strength	1600v. 1/seg

Why TUTCO
1. Heater is UL listed for Outdoor Applications
2. All of the limit controls in all TUTCO duct heaters are
automatic resets or are manually resettable. There are
no devices that have to be replaced when tripped.
3. In a horizontal airflow application, the airflow direction is not specific; it can go either direction without any modification.
4. With our wire rack element suspension system, the heater
coil is less susceptible to airflow shading and allows a very small pressure drop across the coils.
5. All TUTCO duct heaters carry a zero clearance rating for installations into ducts.

Silicone / Cartridge Type 3D Printer Heater 24V 40w Heating Element For 3D Printer

Product Tags:

high watt density cartridge heaters

3d printer ceramic heater

Silicone / Cartridge Type 3D Printer Heater 24V 40w Heating Element For 3D Printer Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Changshu Flex-Tek Thermal Fluid Systems Manufacturer Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!